4 ROLL PLATE BENDING MACHINE China J23 series open back inclinable press China Shaping Machina China Slotting Machine China Vertical Drilling Machine CHMER Brand CNC Series Electric Discharge Machine CHMER Brand CNC Wirecut G53F Fluushing Type DOOSAN Brand High-Performance Horizontal Compact Turning Center DOOSAN Brand Turning Center DOOSAN Vertical Die and Mold machining center DOOSAN Vertical Machining Center EXAC Brand C6266C Big Bore Gap Bed Lathe Series EXAC Brand CNC Lathe EXAC Brand GH Series Big Bore Gap Bed Lathe Machine EXAC Brand HGS Series Hydraulic Guillatine Shear Machine EXAC Brand HPB Series Hydraulic Press Brake Machine EXAC Brand Hydraulic Iron Workers EXAC Brand JH21 Series Open-Type Press With Fixed Table EXAC brand JL21 Series Open-Type Fixed Table Press of High Performance Gear Hobbing Machine Y3150/3 Horizontal Lathe Machine Large-Sized Engine Lathe PINNACLE Brand 5-Axis Machining Center AX450 Pinnacle Brand Milling PINNACLE Brand Vertical Machining Center Box Way Series - SV96, SV116, SV126 Pinnacle Vertical Machining Center Linear Way Series LV65, LV85, LV105 promach brand lathe machine Proth Brand Precision Surface Grinder Machine Shanghai Radial Drilling Machine Z3050x16 TAIWAN Brand Centerless Grinder Series Taiwan Horizontal Band Saw Tilting Hydraulic Machine Vise Vertex Ang-Ficed Milling Vise Vertex Horizontal / Vertical Rotary Table Vertex Hydraulic Machine Vise Vertex K-Type Milling Vise
Promach Machinery Sdn Bhd
45, Jalan Mutiara Emas 5/16,
Taman Mount Austin,
81100 Johor Bahru,
Johor, Malaysia.


Our Products

Previous ‹‹ » Next

Features :

  • 1. Rigid Machine Structure
  • (1) The machine structure is manufactured from high quality Meeharite cast iron, heat treated and stress relieved before machining.
  • (2) Sideways are high frequency hardened and precision ground. Maximum material stability for deformation-free and outstanding wear resistance.
  • 2. Precision Spindles
  • (1) The grinding wheel spindle and the regulating wheel spindle are precision machined from Nickel Chromolybedenum alloy steel (SNCM-220). Also, they are subject to various treatments such as: normalized, tempered and carburized hardening. Then, the spindles are thru sub-zero treated – under zero degrees, precision ground and precision machined.
  • (2) The inside of spindle is tempered to hardness HRC 25°~30°, while surface hardness reaches over HRC 62. The precision ground spindle is excellent for heavy-duty machining and features powerful torque, long service life, deformation-free and maximum wear resistance.
  • 3. Slide Table
  • (1) Upper slide swiveling is easy and accurate to adjust for making the machine suitable for infeeding grinding. Also, it allows grinding for a varied diameter fo workpieces. The Upper slide with +5°~-5° swiveling allows taper grinding by using infeed grinding mode.
  • (2) With thrufeed grinding, the Upper slide provides a surface contact adjustment between the workpiece and grinding wheel. Swiveling adjustment range is +5°~-3°.
  • (3) Dovetailed slideway on the upper slide features smooth and accurate feeding and is lubricated by a centralized lubricator.
  • (4) The bottom slide moves on “Λ” shaped and double-wedged ways.
  • The slideways are hardened and precision ground. They feature smooth movement and properly protected to prevent dust from entering. Micrometric feed adjustment unit is 0.001 mm to meet high accuracy requirements for all workpieces.


Grinding Wheel  
Standard grinding range (Dia.) Ø1~Ø40 mm
Capacity increases with special arrangement Ø30~Ø60 mm
Grinding wheel size (O.D. x width x I.D.) Ø305 x 150 x Ø120
Grinding wheel speed 1900 R.P.M.
Grinding wheel motor 7-1/2 HP x 4P
Regulating Wheel  
Regulating wheel size (O.D. x width x I.D.) Ø205 x 150 x Ø90
Regulating wheel speed 20 ~ 337 R.P.M. (10 Steps)
Regulating wheel motor 1HP x 6P
Regulating wheel tilt angle +5° ~ -3°
Regulating wheel swivel angle ±5°
Handwheel Graduation  
Upper slide feed graduation 4 mm/rev.   0.025 mm/graduation
Upper slide micro-feed graduation 0.1 mm/rev.   0.001 mm/graduation
Lower slide feed graduation 7 mm/rev.  0.05 mm/graduation
Lower slide micro-feed graduation 0.2 mm/rev.  0.001 mm/graduation
Trimming device graduation 1.25 mm/rev.   0.01 mm/graduation
Drive Motors  
Hydraulic pump motor 1 HP x 4P
Coolant pump motor 1/8 HP x 2P
Machine Dimensions  
Machine Dimensions 1750 x 1050 x 1400 mm
Net weight 1650 kgs
Gross weight 1900 kgs

Standard Accessories:

1. Regulating wheel and flange (1 set) (mounted on machine)
2. Grinding wheel and flange (1 set) (mounted on machine)
3. Infeed work rest and carbide blade (1 set)
4. Thrufeed work rest and carbide blade (1 set)
5. Standard electric equipment (1 set) ( mounted on machine)
6. Oil tank (1 set) (ind. Oil cooling fan)
7. Standard coolant system (1 set)
8. Diamond tools (2 pcs) (mounted on machine)
9. Work lamp (1 set) (mounted on machine)
10. Tool box and Tools (1 set)

Optional Accessories:

1. Wheel balancing stand and arbor
2. Automatic infeed attachment
3. Manual feeder for infeed grinding (up and down)
4. Hydraulic work ejector (infeed grinding)
5. Automatic loading attachment (thrufeed grinding) (Ø5-20 mm, L100-600 mm)
6. Automatic feeder for thrufeed grinding (hopper type) (Ø2-8 mm, L50-180 mm)
7. Automatic unloading attachment (thrufeed grinding)
8. V Type Supporter for long bar grinding
9. Profile grinding attachment
10. Magnetic coolant separator
11. Magnetic with paper filter
12. Hydrocyclone coolant separator
13. Auto. Loading and unloading attachment (infeed grinding)
14. Vibratory feeder (thrufeed grinding)
15. Large work rest (thrufeed grinding) L:250 – 500 mm