SV'series Designed for Extra Value and Built for Optimum Performance
Box Way Series
Now you can get the right VMC's with the right features for extra heavy-duty machining, superior stability and excellent rigidity. Pinnacle box way SV series are quality constructed throughout for maximum performance dependability - year after year. If you expect a VMC that will provide higher machining efficiency to reduce production costs, then consider placing a dependable, heavy-duty Pinnacle SV series in your production line.

• 950(1140)(1300) X 610 x 610 mm Travel
• Rapid Feedrate 20/20/20 m/min
• 15 HP Spindle Motor
• ISO40 (ISO50) Spindle Taper
• Spindle Speed 8,000 rpm, 10,000 rpm (option),
• Direct drive 12,000 rpm (option)
• X, Y & Z Axis Box Way

The Best Possible Structural Design
Rugged Construction Assures Optimum Rigidity and Stability.
The major structural parts are manufactured from high quality Meehanite cast iron (FC-30), hardened to over HB190 and tempered to relieve stress.
Box ways on the three axes. Way surfaces are hardened to over HRC55 with over 2 mm depth.
Slideway surfaces are coated with Turcite-B and combined with precision scraping.
Three axes are equipped with class C3 and 36mm (SV65/SV85/SV105) and 40mm (SV96/SV116/SV126)diameter precision ball screws.
Taiwan Patent No.: 177230, China Patent No.: 416211

COUNTER WEIGHT BALANCE SYSTEM
Exclusively designed counter weight balance system. The counter-balance weight moves on a guide shaft to assure movement straightness accuracy. There is no vibration in the forward/backwards and in the right/left directions. This creates superior workpiece surface accuracy to meet various mold machining requirements. Patented in Taiwan and China.

RIGID, PRECISION SPINDLE
ASSURES HIGH QUALITY MACHINING
 

• Supported by superior precision P4 class bearings, the spindle provides an extra wide range of machining capacity and high speed.
• Floating unclamping system assures tool unclamping force will not transmit to the spindle bearings. It provides stable tool clamping and unclamping with the spindle and extends the spindle bearings' life.
• The spindle is a cartridge-type.
• Choice of various spindle speeds - 8,000, 10,000 and 12,000 rpm.
• The circulating oil cooling system on the spindle head prevents thermal expansion and offers the best precision machining environment.

Accuracy
	ISO 10791-4
		Axis Travel	Axis Travel
Tolerances		>500mm<800M	>800mm<1250M
Bi-directional Positioning	A:	0.025	0.032	0.005mm
Bi-directional Repeatability	R:	0.015	0.018	0.005mm
JIS B6336-4 shows the same value as ISO Standard;
P value of VDI / DGQ3441 is equivalent to A of ISO10791-4, and PS is equivalent to R
All values shown above are measured for machine in good air conditoned environments.

MODEL	SV96	SV116	SV126
TABLE
Table Size (mm)	1100 x 610	1300 x 610	1450 x 610
Travel Ranges (X x Y x Z mm)	950 x 610 x 610	1140 x 610 x 610	1300 x 610 x 610
Max. Table Load (kgs)	850	850	850
Spindle Nose to Table Surface (mm)	110 ~ 720	110 ~ 720	110 ~ 720
T-slot (Width x Distance x Number mm)	18 x 125 x 5	18 x 125 x 5	18 x 125 x 5
SPINDLE
Distance Between Column (mm)	ISO40 ISO50
Spindle Inner Diameter (mm)	Ø70 Ø80
Spindle Center to Column (mm)	675 675
Spindle Speed (rpm) Belt	60 ~ 8000 (10,000) 60 ~ 6000 (8,000)
Spindle Speed (rpm) Gear	L40 ~ 2000, H2001 ~ 8000 L40 ~ 2000, H2001 ~ 8000
Spindle Speed (rpm) Direct-Drive	12000 -
Draw Bar Force (kgf)	950 2000
Main Motor (con/30 min Kw)	7.5 / 11 11 / 15
FEED RATE
Rapid Feed Rate (X/Y/Z m/min)	20 / 20 / 20	20 / 20 / 20	20 / 20 / 20
Feed Rate (X/Y/Z/ mm/min)	10000	10000	10000
AXIS SERVOMOTOR
Mitsubishi X/Y/Z (Kw)	HF353 (3.5)	HF353 (3.5)	HF353 (3.5)
Fanuc (Kw)	β22/2,000 i (2.5) or α12/3,000 i (3.0)
Siemens (Kw)	1FK7 063 (2.9)	1FK7 063 (2.9)	1FK7 063 (2.9)
Fagor (Kw)	FKM64.30A	FKM64.30A	FKM64.30A
Heidenhain (Kw)	QSY155B (2.47)	QSY155B (2.47)	QSY155B (2.47)
AUTO TOOL CHANGER	ISO40 ISO50
ATC Type	PLATE / DISK PLATE / DISK
Cam Type	GENOVA / DAUL ARM GENOVA / DAUL ARM
Tool Selection (Bi-direction)	ABSOLUTE / RANDOM ABSOLUTE / RANDOM
Tool Storage Capacity (PCs)	24 / 24 16 / 24
Max. Tool Diameter (mm)	Ø100 / Ø90 Ø115 / Ø115
Max. Tool Length (mm), Weight (kgs)	250, 8 300, 15
MISCELLANEOUS
Air Requirement (Kg/cm2)	6	6	6
Voltage	220	220	220
Power Requirement (KVA)	20	20	20
Coolant Tank Capacity (L)	300	300	300
Machine Weight (Kgs)	6000	6500	6800
Machine Height (mm)	2950	2950	2950
Floor Space (L x W mm)	3100 x 2200	3100 x 2200	3400 x 2200
Packing Size (L x W x H mm)	3150 x 2230 x 2350	3150 x 2230 x 2350	3450 x 2230 x 2350

All Specifications And Designs Are Subject To Change Without Notice.